Casio CTK6000 Uživatelský manuál Strana 1

CTK-6000/WK-6500/CTK-7000/WK-7500/AT-3/AT-5MIDI ImplementationCASIO COMPUTER CO., LTD.ContentsI MIDI Message Overview 71 Product Configuration as a MID

Part IIChannel Message5 Receive ChannelThe channel number of the channel message received by each part is shown in the table under “1.3.2Instrument Pa

Message Format: AnH kkH vvHn: MIDI Channel Numberkk: Key Numbervv: Pressure ValueSend This message is not sent by this Instrument.Receive This message

Receive Receipt adds, to the tone being sounded, modulation of a depth sp ecified by the value. Inthe case of a tone that already has modulation applie

Receive Receipt changes the Expression value.10.7 General Use Controllers 1 through 8 (10H through 13H, 50H through53H)On this Instrument, these messa

Receive Receipt performs an operation equivalent to a sustain pedal operation.Timbre Type Specific Operation This operation differs in accordance with t

Send Sent when the release time setting is configured.Receive Receipt makes a relative change in the time it takes for a note to decay to zero after a

10.15 Vibrato Depth (4DH)Message Format: BnH 4DH vvHn: MIDI Channel Numbervv: Value (Note1)Note1 : For information about the relationship between sett

10.19 NRPN (62H,63H)Message Format: BnH 62H llH (LSB)BnH 63H mmH (MSB)n: MIDI Channel Numberll: LSB Valuemm: MSB Value10.19.1 Part EnableMessage Forma

10.19.3 Mixer Scale Tune EnableMessage Format: BnH 62H 00HBnH 63H 03HBnH 06H mmHBnH 26H llHn: MIDI Channel Numbermm: Value (Note1)ll: (Send:00H, Recei

10.19.5 Drawbar Organ ClickMessage Format: BnH 62H 09HBnH 63H 40HBnH 06H mmHBnH 26H llHn: MIDI Channel Numbermm: Value (Note1)ll: (Not sent, Receive:I

10.5 Pan (0AH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1210.6 Expression (0BH) . . . . . . . . . . . .

Send Sent when the 3rd percussion button is operated (CTK-7000, WK-7500 only).Receive Receipt changes the drawbar parameter 3rd percussion (CTK-7000,

10.20.1 Pitch Bend SensitivityMessage Format: BnH 64H 00HBnH 65H 00HBnH 06H mmHBnH 26H llHn: MIDI Channel Numbermm: MSB Value(00H - 18H)ll: LSB Value(

Send Sent when an RPN, NRPN message send operation is performed.Receive Receipt de-selects RPN, NRPN.11 Mode Message11.1 All Sound Off (78H)Message For

Send This message is not sent by this Instrument.Receive Receipt performs the same operation as when All Notes Off is received.11.6 Mono (7EH)Message F

• DrumThis setting optimizes for drum sounds. The damper pedal does not function. The Hold1, ChannelCoarse Tune, and Master Coarse Tune messages are i

Part IIISystem Message15 Timing ClockMessage Format: F8HSend Sent when auto accompaniment is used.Receive This message is not received by this Instrum

19.1 Universal Real Time System Exclusive MessageMessage Format: F0H 7FH...F7H19.1.1 Master VolumeMessage Format: F0H 7FH 7FH 04H 01H llH mmH F7Hll:

Receive Receipt changes the Patch Master Coarse Tune parameter.19.1.5 Reverb TypeMessage Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 01H 00H vvH F7Hvv

19.1.9 Scale/Octave 2 Byte Real Time TuningMessage Format: F0H 7FH 7FH 08H 09H ffH ggH hhH ssH ttH ... F7Hff: Channel Byte 1 (bits 0 to 1 = channel 15

Receive Receipt performs the same operation as when the GM System On message is received.19.2 Instrument-Specific System Exclusive MessageMessage Forma

19 System Exclusive Message 2519.1 Universal Real Time System Exclusive Message . . . . . . . . . . . . . . . . . . . . . . . . 2619.2 Instrument-Spec

Part IVInstrument-Specific System ExclusiveMessages20 FormatThis section explains the format of the Instrument-specific System Exclusive Messages. See “

The table below shows the body format for each action of Instrument-specific system exclusive mes-sages. An actual message consists of the items indica

20.3.5 act : ActionFormat: 0aaaaaaaBThis field indicates the operation of the Instrument-specific System Exclusive Message.aaaaaaaB Action Function00H I

SBS:Start of Bulk Dump Session This message is sent to both devices to start a session to transfera series of parameter sets using one-way protocol or

A · · · Available (Also including when only some parameters are available.)F · · · File Information (Not the data itself. Name, size, and other file in

2-dimension array block [index1][index0]Value Meaning00jjjjjjjiiiiiiiB 0000H00lllllllkkkkkkkB 0000H00nnnnnnnmmmmmmmB index100pppppppoooooooB index03-d

Bulk Parameter Set Transfer The value of this field specifies the size of the parameter set memoryimage stored in the img field. Data length indicates th

• Data = 3 : Start HBS SessionStart session to send data using handshake protocol. If a device that receives this message acceptsthe session, it needs

Table 17 6 5 4 3 2 1 0Memory data 00: [00.7] [00.6] [00.5] [00.4] [00.3] [00.2] [00.1] [00.0]Memory data 01: [01.7] [01.6] [01.5] [01.4] [01.3] [01.2]

20.3.16 EOX : End of System Exclusive MessageFormat: 11110111B (F7H)This is the End of System Exclusive Message status byte established by the MIDI st

27 Scale Memory Parameter 5427.1 Scale Memory Octave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5428 DSP Parameter 54

Session “One session” refers to a series of processes that occur for one user operation. One subsessionor multiple subsessions make up a session. The

22.2.2 Example: Data send to Instrument from external deviceData Sender Data Receiver Operation(External Device) (This Instrument)SBS(OBS) -----> S

it resends the last data sent. If the correct message does not arrive after a preset number of retries,RJC is sent and the session is terminated. The

Data Receiver Data Sender Operation(External Device) (This Instrument)SBS(HBR) -----> Session StartRequest<----- ACK AcknowledgeHBR -----> Se

22.3.9 Example: Session Generating a Timeout ErrorData Receiver Data Sender Operation(External Device) (This Instrument)SBS(HBR) -----> Session Sta

Data Receiver Data Sender Operation(External Device) (This Instrument)SBS(HBR) -----> Session Start Request<----- ACK AcknowledgeHBR -----> S

Note : Number of retries that exceeds the retries stipulated by Handshake Max Retry explained under “24.2 SystemExclusive Protocol Parameter”.22.3.12

Data Sender Data Receiver Operation(External Device) (This Instrument)SBS(HBS) -----> Session Start Request<----- ACK AcknowledgeHBS -----> S

Note2 : The sessions can be paused by sending RJC here.48

Part VParameter ListThis section explains the parameters that actually can be transferred by the Instrument.23 Using the Parameter List• Parameter fiel

35.11 Reflection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6035.12 Rotary . . . . . . . . . . . . . . .

24.2 System Exclusive Protocol ParameterThese parameters are related to the System Exclusive message protocol.Parameter ID R/W Block Size Array Min-De

Parameter ID R/W Block Size Array Min-Def-Max DescriptionPs Category 0019 W 00000000 7 01 00-00-7F Specifiesthe category ID of theparameter set that c

25 Patch ParameterThe main function of patch parameters is to configure the settings of the sound source of a device.25.1 Analog Input Tune ParameterTh

25.5 Master Tune ParameterThese parameters configure the Master Tuning settings.Parameter ID R/W Block Size Array Min-Def-Max DescriptionMaster Fine Tu

26.2 Tone ParameterThese parameters configure settings of tone basic settings.Parameter ID R/W Block Size Array Min-Def-Max DescriptionAttack Time 0008

Parameter ID R/W Block Size Array Min-Def-Max DescriptionName 0000 R/W 00000000 7 10 00-20-7F Ascii CharacterRev Send 0001 R/W ↑ 7 01 00-28-7F 0 - 127

Part VIParameter Set ListThis section explains actually how parameter sets can be transferred by the Instrument with bulk dump.33 Parameter Set TableF

33.3 AT-3/AT-5Parameter Set Category cat mem pset descriptionTone 03H 02H 0000H - 0063H (User Tone 1 - 100)Scale Memory 12H 02H 0000H (User Scale Memo

34.2 Dual DSPNumb er ID Type15 41H Wah-Comp16 42H Wah-Dist17 43H Wah-Cho18 44H Wah-Flan19 45H Wah-Ref20 46H Wah-Trem21 47H Wah-Pan22 48H Comp-Wah23 49

Note1 : For information about the relationship between setting values and send/receive values, see “36.17 LFO Wave Form1Setting Value Table” in “VIII

36 Setting Value Tables 7036.1 Off/On Setting Value Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7036.2 –64 - 0 - +63 Se

Note1 : For information about the relationship between setting values and send/receive values, see “36.18 LFO Wave Form2Setting Value Table” in “VIII

Note1 : For information about the relationship between setting values and send/receive values, see “36.21 Reflection SettingValue Table” in “VIII Setti

Note3 : For information about the relationship between setting values and send/receive values, see “36.13 0-5 Setting ValueTable” in “VIII Setting Val

Parameter Number Parameter Name Value NotesParameter7[1] WahWvform 00 - 7F Note1Parameter7[2] Wah Rate 00 - 7FParameter7[3] Wah Depth 00 - 7FParameter

Note2 : For information about the relationship between setting values and send/receive values, see “36.19 LFO Wave Form3Setting Value Table” in “VIII

35.27 Compressor TremoloParameter Number Parameter Name Value NotesParameter7[1] CmpThresh 00 - 7FParameter7[2] Cmp Level 00 - 7FParameter7[3] TrmWvfo

Note1 : For information about the relationship between setting values and send/receive values, see “36.19 LFO Wave Form3Setting Value Table” in “VIII

Note1 : For information about the relationship between setting values and send/receive values, see “36.19 LFO Wave Form3Setting Value Table” in “VIII

35.41 Reflection ChorusParameter Number Parameter Name Value NotesParameter7[1] Ref Fbk 00 - 7FParameter7[2] ChoWvform 00 - 7F Note1Parameter7[3] Cho R

35.45 Tremolo FlangerParameter Number Parameter Name Value NotesParameter7[1] TrmWvform 00 - 7F Note1Parameter7[2] Trm Rate 00 - 7FParameter7[3] Trm D

Part IMIDI Message Overview1 Product Configuration as a MIDI DeviceAs a MIDI device, this Instrument consists of the System Section, Sound Generator Se

Part VIIISetting Values and Send/ Receive Values36 Setting Value Tables36.1 Off/On Setting Value TableTransmit Value Receive Value Parameter00H 00H - 3

Transmit Value Receive Value Parameter(LSB, MSB)(43H, 00H) (00H, 00H) - (5FH, 00H) 415.5 Hz(65H, 00H) (60H, 00H) - (7FH, 00H) 415.6 Hz(07H, 01H) (00H,

Transmit Value Receive Value Parameter- 00H - 07H 0(shortest)- 08H - 0FH 1- 10H - 17H 2- 18H - 1FH 3- 20H - 27H 4- 28H - 2FH 5- 30H - 37H 6- 38H - 3FH

36.13 0-5 Setting Value TableTransmit Value Receive Value Parameter00H 00H - 14H 019H 15H - 29H 133H 2AH - 3FH 24CH 40H - 54H 366H 55H - 69H 47FH 6AH

36.20 LoFi Noise Level Setting Value TableTransmit Value Receive Value Parameter00H 00H - 14H 019H 15H - 29H 133H 2AH - 3FH 24CH 40H - 54H 366H 55H -

Part IXMIDI Implementation Notation37 Value Notation37.1 Hexadecimal NotationMIDI implementation sometimes requires that data be expressed in hexadeci

Decimal Hexadecimal Binary0 00H 00000000B1 01H 00000001B2 02H 00000010B3 03H 00000011B4 04H 00000100B5 05H 00000101B6 06H 00000110B7 07H 00000111B8 08

MA1012-A

1.3.2 Instrument Part BlockThe instrument part section consists of a total of 32 instrument parts, divided into two groups, namedGroup A and Group B o

2 Timbre Type Specific OperationThe sound source operation performed for a sound generator instrument receive message may depend onthe value of the Tim